Certified Welding & Assembly
Steel & Metal Fabrication Company in Dubai, UAE
SAITECH is a steel fabrication company in Dubai, based in Jebel Ali Free Zone (JAFZA) since 2003. We take projects from raw plate to a finished, tested and painted assembly, with cutting, bending, rolling, welding, NDT, blasting and coating all done in-house. Contractors and OEMs across the UAE and GCC use us for heavy work that smaller workshops can't take on: components over 40 tons and carbon steel plate up to 250 mm thick.

Full In-House Fabrication & Assembly
We provide heavy steel fabrication services for projects across the Middle East, Africa, and international markets.
From raw plate to finished assembly. Cutting, bending, rolling, welding, and assembly under one roof—ensuring quality control at every stage.
No subcontracting — all cutting, forming, welding, and finishing controlled internally.
40+ ton component handling
14m × 3m plasma cutting bed
Plates up to 250mm carbon steel
Bending & rolling in-house
NDT testing & pressure certification
Structural assembly & complex fixtures
FABRICATION CAPABILITIES
Large-scale fabrication capabilities for plates, structures, and pressure components.

CNC Plasma Cutting
14m × 3m bed, up to 250mm carbon steel

Press Brake Bending
600-ton capacity, 20-foot stroke

Plate Bending
50mm × 3m capacity with 450mm roller

RCMI Angle Rolling
I-beams, H-beams, profiles, angles

Multi-Process Welding
8 certified welding processes

Blasting & Painting
12m × 56m chambers
CNC Plasma Cutting
Suitable for full plate nesting, structural components, and heavy assemblies
Cutting Bed Size
14M × 3M
Full-size plate cutting capacity
Carbon Steel
STAINLESS STEEL
250mm
Maximum thickness
80mm
Maximum thickness
CNC-controlled plasma system delivers precise cuts on a wide variety of full-size plates. Automated nesting optimizes material usage and reduces waste.
Bending & Forming Equipment
Press Brake
capacity
600 Tons
Max Stroke Length
20 feet
Capable of bending, forming, flattening, and rolling heavy plate and structural components.
Plate Bending Machine
Plate Bending Capacity
50mm × 3m
Roller Diameter
450mm
HAV electronic 3-roll configuration with independent roll movement. Excellent traction and minimal pre-bending straightness.
RCMI Angle Roll Bending Machine
Three-roll section bending machine specifically designed for bending profiles and angles. Modular rolls allow bending of flat bars, square bars, round bars, T-profiles, angles, I-beams, H-beams, and U-channels with maximum accuracy.
Flat Bars
Angles
Square Bars
I-Beams
Round Bars
H-Beams
T-Profiles
U-Channels
Multiple Welding Stations
Oxy/Acetylene (OXY/ACT)
Manual Metal Arc (MMA)
Metal Inert Gas (MIG/MAG)
Flux-Cored Arc (FCAW)
Tungsten Inert Gas (TIG)
Submerged Arc (SAW)
Shielded Metal Arc (SMAW)
Testing & QC
Non-Destructive Testing
Visual Inspection
Magnetic Particle Inspection (MPI)
Dye Penetrant Inspection (DPI)
Hardness Testing
Pressure Testing
Hydro-Testing Beds
Pneumatic Testing Beds
In-house or Third-party
Full Documentation
Gas Tungsten Arc (GTAW)
Welding performed to ASME-qualified WPS/PQR procedures, with full documentation support.
BLASTING & PAINTING
Blasting Chambers
Chamber Dimensions
9m W × 14m L
Two enclosed chambers with overhead cranes
Blasting Media
-
Steel shot & grit blasting
-
Bead blasting
-
Aggressive to mild profiles
Spray Booth & Coatings
Coating Types
-
Industrial Primers
-
Epoxy Coatings
-
High-Temperature Paints
-
Corrosion Protection Systems
Quality Assurance
-
Certified paint specialists
-
Blast profile inspection
-
Dry film thickness per standards
Coating systems applied per project specifications and client standards.
HOW WE BUILD IT


1
Design Review
2
Cutting & Shaping



3
Bending & Rolling
4
Welding Assembly
5
Testing & Finish
Industries & Applications

Oil & Gas
Manifolds
Mud Tanks
Skid structures
Pressure vessels
Mining & Minerals

Wear Buckets
Chutes
Drive frames
Hoppers

Marine & Offshore
Hull structures
Pipe Assemblies
Subsea frames
Risers
Power Station

Boilers
Heat Exchanger
Ductwork
Collector tanks
Heavy steel fabrication in Dubai
Our fabrication shop in JAFZA is built for large structures and heavy plate. A 14 m × 3 m CNC plasma cutting bed handles full-size plates in carbon steel up to 250 mm and stainless steel up to 80 mm. Plate is formed on a 600-ton press brake and a 3-roll plate bending machine (50 mm × 3 m), and beams and profiles are curved on an RCMI angle roll.
Welding is carried out to ASME-qualified WPS/PQR procedures across eight processes, including submerged arc (SAW), MIG/MAG, TIG/GTAW and flux-cored welding. Every job is inspected before it leaves the shop: visual inspection, magnetic particle (MPI), dye penetrant (DPI), hardness testing, and hydrostatic or pneumatic pressure testing, with full documentation. Third-party inspectors are welcome. SAITECH is certified to ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
What we fabricate
Structural steel fabrication
Steel frames, skids, platforms, supports and structural assemblies built to customer drawings. I-beams, H-beams, channels and angles are cut, rolled and welded in-house, then blasted and painted in the same facility.
Stainless steel fabrication
Stainless steel tanks, pipe assemblies and process components, cut on our plasma bed up to 80 mm and welded with TIG/GTAW for clean, corrosion-resistant joints. We also work in duplex and alloy steels.
Pressure vessels and heat exchangers
Pressure vessels, heat exchangers, collector tanks and ductwork for oil and gas, power and desalination plants, with in-house hydrostatic and pneumatic test beds.
Mining, oil & gas and marine
Wear buckets, chutes and hoppers in heavy plate; manifolds, mud tanks and skid structures; and subsea frames, risers and pipe assemblies for onshore and offshore projects.
Why companies in the UAE choose SAITECH
-
One facility, no subcontracting: cutting, forming, welding, testing, blasting and painting are all controlled in-house.
-
Built for large parts: 40+ ton handling, a 14 m cutting bed and two enclosed 9 m × 14 m blasting chambers with overhead cranes.
-
Machining under the same roof: fabricated parts can be CNC machined in-house, with no transport between suppliers.
-
JAFZA location: our own transport and Bill of Entry handling deliver finished assemblies across the UAE, the GCC or for export.
-
Quotes within 24 hours: send drawings, a BOQ or specifications and our engineers review them the same day.
Steel fabrication FAQ
What is the largest component you can fabricate?
We handle components over 40 tons. Our plasma cutting bed takes plates up to 14 m × 3 m, in carbon steel up to 250 mm and stainless steel up to 80 mm thick.
Which welding processes do you use?
Eight certified processes, including submerged arc (SAW), MIG/MAG, TIG/GTAW, flux-cored (FCAW) and shielded metal arc (SMAW/MMA), all to ASME-qualified WPS/PQR procedures.
How do you test fabricated parts?
Visual inspection, magnetic particle (MPI), dye penetrant (DPI) and hardness testing, plus hydrostatic and pneumatic pressure testing, in-house or by a third party, with full documentation.
Can you blast and paint after fabrication?
Yes. We have two enclosed 12 m × 56 m blasting chambers and a spray booth for industrial primers, epoxy and high-temperature coatings, with blast profile and dry film thickness checks.
Where are you located, and do you deliver?
Our facility is in Jebel Ali Free Zone (JAFZA), Dubai. We run our own transport and handle Bill of Entry paperwork for delivery across the UAE, the GCC and for export.
How quickly can I get a quote?
Send your drawings, BOQ or specifications and we will review them and quote within 24 hours.

